Tips of Install iPhone 6 Plus LCD Assembly

As a iPhone replacement parts supplier, let me tell you About iPhone 6 plus LCD Screen and Digitizer Assembly with Frame Replacement.

How to Install / Tips:
1. Please choose the right part before placing an order.
2. Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
3. Special tooling is required when disassembling and reassembling the iPhone 6 plus.
4. The installation of any new parts should be done by a qualified person.


Apple iPhone 6 Plus LCD Screen and Digitizer Assembly with Frame

1. After pulling up the screen assembly, don’t raise the screen more than 90ofrom the rear housing to prevent damage to the flex cables.
2. Unplug the front facing camera’s flex connector, flex connector, LCD screen flex connector and the digitizer flex connector.
3. The flex cables should be gently folded a little bit before installation, but do not use too much force, no kink marks should be seen on the flex cables.
4. Do not force any IC located on the back side of the screen.
5. Plugin the front facing camera’s flex connector, flex connector, LCD screen flex connector and digitizer flex connector.
6. When plugging in the connectors, keep the screen within 90oof the rear housing.