IPhone6 home key demolition tutorial illustration

Step 1: Remove the two 1. 9mm screws from the home key holder.
Step 2: Remove the home key bracket from the front panel.
Step 3: Use a screwdriver to make home button cable high to disconnect, put it far away from the home button.
Step 4: push the home key top-left corner upright (the upper-left corner when looking at the front). Do not have to push it, as long as the angle can be used to promote loose after the pry to the screw. The key membrane is very thin, and if you feel it has been broken, stop and heating with a gentle method (such as use the iOpener, hot air gun or hair dryer) and then continue to try.
Step 5: Using a screwdriver, gently pry the rest out of the front panel.
Step 6: With a small screwdriver tip to remove the adhesive which fixed home button cable, separated home button from the front panel.
Step 7: If the adhesive has been completely clear, then put the home key removed from the front panel.
Step 8: Around Home keys there is rubber pad, use tweezers slowly to pull out the rubber pad, be careful not to damage rubber puncture.

Above is the demolition process of iphone 6 home key, more about OEM iPhone 6s replacement parts, come to www.rootmi.com.