Teach you how to replace the IPhone 6 battery

Step 1: Obtain the following tools and parts
IPhone 6 replacement battery and IPhone replacement kit. Need to buy a new battery, a dedicated screwdriver, a pry piece, and a screen sucker.

Step 2: Find mobile phone charging two pentagons screws on either side of the interface. Open the IPhone 6 you just need to unscrew the two screws.

Step 3: Turn off the phone power, use the tool kit of the pentagonal screwdriver to remove the screw. The head of the screwdriver is small, but it is math with the IPhone 6 small screw in the bottom.

Step 4: Use the suction cup to pull out the screen above the home button. The suction cup in the home button on the top of the other hand holding the fuselage, and then pull out. You just need to pry between the screen and the fuselage to squeeze enough space into a plastic piece.

Step 5: Use the pry lever to pry out the screen. From the IPhone home button to start around the screen a little bit upwards pry.

Step 6: The screen part of the erected 90 degrees, but do not exceed this angle. The top of the screen is still connected with the body together, so do not pull hard.

Step 7: Find and unscrewed the screw fixed screen attachment. It is a good idea to remove the screen when removing the battery, because the battery is fixed with glue, it may be troublesome to remove it. Remove the screw from the protective cover and remove the protective cover.

Step 8: Remove the connector from the screen. There are several connectors between the screen and the phone body, and you can pick them out of the port with a small finger or thin nail file.

Step 9: Remove the battery connector cover. The battery connector cover is secured by two screws, unscrew them, and remove the metal cover.

Step 10: Remove the battery connector. There is only one connector between the battery and the board, and you can pick it up with a small finger or a thin nail file.
Step 11: Heat the back cover with a hair dryer to soften the glue. IPhone 6 uses a lot of glue to fix the battery, they need to soften the battery to take down. You can use the hair dryer to heat the phone cover, to achieve the purpose of softening the glue. Do not use a higher temperature than this heating tool, to be able to comfortably when heated will take the phone in the hands of the degree.

Step 12: Use a credit card or plastic paddle to gently pry open the battery. You can use the bank card, thin pick-wiping or a little child in the bottom of the pry open the battery. Avoid the top part near the screen connector, because there is also hidden below the connector. In addition, do not take mobile phone parts when prying the fulcrum of the battery. Try to keep the glue attached to the case so that you can reuse it later

Step 13: Connect the new battery and fold down the connector. If you do not have too much glue left, you can use ultra-thin double-sided adhesive to fix the new battery. The connector only needs a little bit of force to return to the slot, but the alignment position can be a bit cumbersome and requires you to spend some time. The original battery connector is folded down, so now is the same. You can press it down with a small dial or a thin metal file.

Step 14: Reconnect the screen connector and replace the battery and the metal connector of the screen. Connect the screen connector in the reverse order, starting with the connector on the top of the body, and then replace the metal protective cover.

Of course, we still have to warn users not to easily replace the IPhone 6 battery. Even if you want to replace, but also pay attention to the quality of the battery.